Products
10/100 Ethernet Tap
Model: 10/100-AT
The 10/100 Ethernet Tap is a single port device that provides a method to observe traffic on a full duplex Ethernet segment. The 10/100 Ethernet Tap provides easy access to segments while maintaining network integrity with "no break the link" design. Network performance will not be affected by power loss.
- Eliminates the need for network connectors to be disconnected and connected each
time a segment needs to be analyzed
- Non-intrusive, fault-tolerant, invisible to the network
- Redundant power supply insures seamless monitoring even if the main power source
is unavailable
- Never lose packets from power failure - industry-leading "no break the link"
design guarantees network traffic will continue to flow uninterrupted
- View all traffic on both sides of full duplex links
- Reduces degradation of switch performance due to port mirroring
- View Layer 1 and 2 errors such as runts and CRC errors
- Comes with convenient built-in rack-mount or use an optional rack-mount package to
mount 3 units (at 1U) and up to 14 units (at 4U).
- Passes all pairs
- Supports Power over Ethernet (PoE)
| Network Connections | 10/100 Tap (RJ45) |
| Tap/Monitoring Connections | 10/100 (RJ45) |
| Power | 5 VDC, 0.5A Redundant Power Supply |
| Dimensions (H x W x D) | 1.07 X 5 X 5 in 2.7 X 12.7 X 12.7 cm |
| Weight | 8 oz. .23Kgs |
| Operating Temperature | 0 to 40 deg C |
| Storage Temperature | -30 to 65 deg C |
| Humidity | Less than 95 deg C non-condensing |
| Certifications | EN 50082-1 61000-4 Series EN 55022 Class A Low Voltage Directive 72-23-EEC (1993) CFR 47 Part 15 Class A CE |
| Warranty | Two (2) Years |
| Ordering Information | 10/100-AT - 10/100 Ethernet Tap |
| Optional Rack Mount | RMC-3 |
Fill out the form below and we will get back to you asap!
